Home » Electric scooter kit » 10 inch electric scooter kit for razor e300 upgrading
- Model: UUKIT10S
- Price: USD198-USD245
Motor tyre size 10×4.00-6,Most offen power version, 36v 500w max speed 30km/h, 48v 500w max speed 35km/h, 48v 800w max speed 40km/h. This kit is good to upgrade the electric scooter razor e300. Buying link 800w fat tire 10 inch hub motor controller kit.
The razor e300 upgrade kit motor details, please refer to this 13 inch gearless hub motor, it is the same motor with different size tires.
what does this 10 inch electric scooter conversion kit include?
1. 10 inch brushless dc hub motor, gearless, tubeless tyre (10×4-6)
2. programable brushless dc motor controller
3. throttle with LED battery indicator
4. disc brake plate and caliper
5. electric bike braking levers
We can use 9 inch, 10 inch, 12 inch,13 inch and 15 inch tyre for this scooter fat tire gearless hub motor.
The Razor E300 upgrades images as follows:
Category
Tags
4 inch hub motor 5 inch hub motor 6 inch hub motor 8 inch electric wheelchair motor 8 inch hub motor 8.5 inch motor 10 inch hub motor 12 inch hub motor 13 inch hub motor 14 inch hub motor 15 inch hub motor 16 inch hub motor 20 inch hub motor 28 inch electric bike conversion kit 250W electric bike conversion kit 250w motor 350w motor 500W electric bike conversion kit 500w motor 800w motor 1000W electric bike conversion kit 1000w motor 3000w motor 3000w scooter motor 3500w hub motor disc braking motor drum brake hub motor dual controllers electric motorcycle motor electric scooter motor electric scooter motor kit electric trike kit electric wheelbarrow motor electric wheelchair motor Geared motor high speed motor hub motor with encoder in wheel hub motor low speed high torque motor mono shaft motor pneumatic hub motor pu tire motor servo hub motor single shaft hub motor wheelchair motor kit
62 responses to “10 inch electric scooter kit for razor e300 upgrading”
I would like to know the price and how to purchase there 36v 500w kit for a razor e300.
Im trying to upgrade a Razor E300. I want it to go farther and faster. What do I need to do?
To updated the battery voltage supply
HI IM CUSTOMINZING A RAZOR E300 THROUGHOUT ABIT AT A TIME CHANGED THE 10” WHEELS FOOR SOME BIGGER 1’S. NOW HOPING TO UP VOLTAGE TO 36V AND RUN 2 X SEGWAY NINEBOT BOT MOTORS IN EACH WHEEL.. WHEEL SEE HEY
it is also a good idea to do that.
Can you please send me a quote for the 10 inch conversion kit to use on goped bigfoot with the mono shaft.
Delivered to Cardiff, Wales
Regards
Hi Tony, will the 48V 800W hub motor with 10 Inc wheel fit on Razor E300 scooter? does it need any modification or is it plug and play? also any recommendation on Battery and where to get? looking for an easy upgrade kit without needing to modify frame or anything .
Thanks
I’m looking to up grade my laotie es 10P I want to go at least 45-55 mph what would u recommend?
Hi,
Can you quote for front driveless wheel in addition to this kit on 9″ tires 36v/500w. This is for an e325.
Thanks!
(shipping to USA)
The no drive wheel is USD30 with tire.
Hey Tony,
How do I go about buying a kit. I’d like to upgrade my son’s razor e300. Do you sell the batteries and chargers too.
Thanks
We do not have battery and charger
Daron,
did you notice more acceleration or just a higher top speed?
Hello,
I am looking to convert my Goped Bigfoot to electric. Can you please provide quote for a conversion kit.
Thank you and warm regards.
Lee / Texas
You can use a mono shaft 10 inch motor for it. we have the motor in our web store.
Im thinking about repurposing this motor for a different scooter and id like a larger diameter tire, since this motor is the same as the 13inch kit referenced above could i just swap out the tirefor a bigger one? If so can you link me to a compatible tire?
Yes, we have this motor with larger tire, the 13×5-6 tire, please check this https://www.uumotor.com/13-inch-off-road-geared-wheelbarrow-hub-motor.html , we have the motor in road tire and off road tires.
I was actually wondering if i could just swap out a different tire for the same motor, instead of buyjng a whole new kit
Yes, it is ok to install a different tire.
Tony, in the QA section said that there is a 2000w hub motor kit that fits the razor e300 where can I find that motor?
Hello. I’m interested in making this conversion to my Razor E300. Would you mind sharing how you attached the brake caliper to the frame? Thanks so much!
I am sorry that I have no good solution. It is our customer who solved the problem.
We got the kit and upgraded my kids Razor e300. we did 36v with AGM batteries. We had very good results. My 12 year old loves and we had a good father/son project together. Dont forget you will need a 36v charger, the old charger will not work well.
Thanks! If you could share me some of the upgraded photos, that will be appreciated.
Is there a motor with a dropout size of about 110mm in a 10inch 48V 800W motor?
If you sell these motors, I want to know the price, weight and torque information.
Thanks!
what is the torque (in Nm) of the 48V-800W 10″ front hub motor?
Thanks!
what do i need to purchase to have regenarative braking system. my scooter is 36v350w18.2ah..? do you have a workshop in SG?
I am sorry that we do not have workshop in SG.
I am planning on using this on a Razor e300. I will be buying 3rd party front forks with shock absorbers so the size is fine (thanks for the picture!) and converting to either a 48v or 60v lipo setup. If I go with 60v, can I limit the 800w motor myself and basically run it at 500w range since I don’t need the speed as much as range? That way if I DO find later that I want more power I can just undo my limitation. (Remove the resistor or buck converter or whatever is necessary.) Thanks, and here’s hoping to have it up and running soon!
If you want to limit you power, I suggest you have a try our 60v 2kw motor and controller, the controller is ok to be set to in lower power via to limit the current. This kit controller is not ok to control power.
Tony,
can you provide a link to the 60v 2kw motor and controller you recommended?
Yes. We have. You can use this motor https://retail.uumotor.com/product/80km-h-60v-2000w-scooter-motor/
Matt,
What did you find for aftermarket front suspension?
What motor did you wind up going with?
Where did you eventually get your battery from?
Tony, thank you for the quick reply. The drop out size of this motor is a little small but I wonder if I could use a spacer on each side to fill the space?
It also looks like this hub is only about 6 inches (170mm) and by adding the rubber tire it is 10 inches (254mm). I was looking for a 10″ hub (254mm) and between 14.5″ (368mm) to 16 inch (420mm) diameter with rubber tire.
Do you offer a motor with a larger drop out size closer to 165mm or could I use a spacer on each side of my frame to allow the 139mm drop out from this motor?
Looking for a complete kit with controller, brake levers, disc brake and twist throttle. 45kph 10s to 12s LiPo
Do you have a complete kit for a Razor MX 650 electric scooter to convert to your 10″ hub motor?
Drop out size is 165mm, (I can probably make something a little smaller work if you don’t have 165mm).
10″ is perfect but I could use a 12″ if necessary
Scooter and rider weight 115Kg together
Looking for 45 KPH max from either 10s lipo (42v fresh off charger, 36v under load) or 12s lipo (50v fresh off charger, 43v under load)
What do you have that would work?
thanks,
Carl
Here is the Razor MX650 , it is small
https://www.amazon.com/Razor-MX650-Rocket-Electric-Motocross/dp/B01KHE8QAY
Hello is this available in a thumb throttle? Also do you have the matching free wheel tire for this? Thank you!
Hi, the thumb throttle is ok. for a matching free wheel, we can find it for you, it is not the same looking as the motor.
hi
i bough hyper toy e-scooter 60v 2000w streets racing about a month ago, i want to increase speed to 62+ mph (100+ km/h) , do you have conversion package kits for that 10 inch wheel electric scooter ? and can you ship to Vancouver ( Canada )
Thanks
what is your scooter motor size? we have electric motorcycle motor which can customize the speed for you.
here is my electric scooter website
http://www.hyperpowersports.com/products/2016-hyper-racing-off-road-gold-2000-watt-60v-electric-scooter-black-free-shipping-usa.html
the motor is brushless 2000watt DC Brushless 60v 5400 rpm motor, not sure about the size but my guess is 10inch brushless motor,
When you have time please follow the link they website will give u all the information about the bike
Thank you for your respond
Yes, the wheel size is about 10inch. But this scooter is powerful than ours, and also the speed is higher than our hub motor.
Like the 500 watt 10″ hub motor, do you have a 1000 watt version available?
we have 48v 800w version.
Dumb question here. What if I want to have a two wheel drive scooter? Will 1 controller work with 2 motors in tandem? Thanks
We do not suggest so. It is not stable.
Thank you for responding. Could you please tell me how I could achieve 2 wheel drive? I am looking to make many scooters like this. Thanks
each motor needs a controller.
Do you know how many pole pairs the 10inch motor has?
20 poles
last question : what is the length of the different wires between the different components? (to make sure that it fits into our frame)
Thanks and best regards
what is the torque (in Nm) of the 36V-500W 10″ hubmotor?
Thanks
The rated torque is 9N.m.
Thanks a lot for your answer and your kind help. I will order one kit to test it on our scooters.
Flexscoot,
How did you like the 500w motor?
I was your website, what motor did you finally go with?
I want to order the 10″ electric scooter kit for our rangfe of scooter but I need to know the torque (Nm) of the hubmotor.
Thanks to answer
Thanks and best regards
What is the drop-out size for the 10 inch motor kit? I’m trying to increase the speed on my existing 250 Watt motor so changing to a 500W motor should give me another 5-10 km/h.
The dropout size is 135mm,
Hi,
Do you have a complete E kit for Trikke T8 Air? How much to ship it in California 94080?
No. I am sorry. We can provide the motor and controller.
I see that TG10 looks like will work for trikke 8. Do you have the 48volt version with controller package for this kit? How much to ship to 94080?
Hi Tony. I see that TG10 brushless hub will work for my Trikke 8 air.
Will it work for either 36 and 48 volt? Or I have to specify when ordering?
What is the compatible controller if I choose 48 volt? Please email me the package deal and how much.
Thanks.
Our standard version is 36v, but if you like 48v, it is also ok. we can customize it for you. You can also visit here to buy https://www.uumotor.com/ws/p/fat-tire-10-inch-48v-800w-electric-scooter-kit/